Wapiti wrote:Great might idea, although might be awhile, I'm just on a holiday in St Vincent's Memorial after correcting that bloody motor bike stack you know about
get well soon mate , hope everything goes smoothly
Wapiti wrote:Great might idea, although might be awhile, I'm just on a holiday in St Vincent's Memorial after correcting that bloody motor bike stack you know about








Wapiti wrote:Went to Rebels today, finally got a loading block big enough for 338 Lapua, and a box to put that long loaded ammo on, base-up.
Not easy to find.
No 12g rubber buckshot though, I'm struggling to find a supplier nowadays.
Anyway, had a yarn to them about the Boyds walnut stocks, and I've done the build - red english buttpad, black forend tip, pistol grip cap, 14.5" LOP.
Hopefully back-Country outfitters will bring it in like that for me. Just got to check the centres of the action bolts.


Wapiti wrote:Yeah Rich, all looks great with what's offered, an unreal service for the money but checkering was not an option. I might go back and see if I missed it.
I have cleaned checkering up with some suitable angled small files - I actually only mostly used the tip where I sharpen it - where others have sanded it half out or filled it with re-finishing crud but that's cheating because it was already there.
Extremely apprehensive about doing it myself from scratch because no real coming back from a screw-up.
Plus I've never seen any checkering tools or templates locally.
THEN - When looking at a couple of custom Mausers being resold at Rebels in Brisbane, I realise that with the PH I have, the only way to give it even 1/4 of that feel will be in the stock and the kind of finish I give it. It will have to be a completely matt, filled-grain rubbed oil type.


Wapiti wrote:I'll see what happens here.
I'm beginning to think that, although this PH is pretty much as new, it's really only a cheapie.
Backcountry is checking with Boyds to see if they can get some laser-checkering done on the stock I've just outlined I'd like,
black forend angled tip, grip cap, red Pachmeyr pad, 14.5" LOP for my monkey-arms etc. Grain unfilled for me to rub in a month of danish oil coats and it's already $700 US without checkering.
We'll see.
And I haven't shot the rifle yet.


Wapiti wrote:$1300 AUD is the cost of the walnut stock, Grade XX without checkering - they don't do it at Boyd's.
But that's with the installed angled black forend tip, grip cap and red Pachmeyr pad.
I still have to check that the action hole dimensions, receiver diameter etc is the same as the one they do.



Wapiti wrote:Just looked... Fleur de'Lis checkering is my favourite. Wow..
Wonder what that'll add to the stock.
We were at $1200 AU already, that was with $200 discount for being a returning customer and for skipping the resellers' (gunshops markup) profit.
Thanks Rich.
I'm starting from a cheap base, so the cost of the near-new condition donor for $300 with scope and mounts helps out heaps, so hey, no whinging accepted.
The Blued steel Hillver mount will make it look 100% better than the ugly weak Weaver - Sportsmatch type alloy mounts, and I've decided the 3-9x40 VX2 I had chosen from the stash will be swapped for a new VX3i 2.5-8x36 that's sitting here looking for daylight.
The red 1" Pachmeyr will look unreal.
Hashtag- new enthusiasm...
Edit- predictive text, changing all these brand names and words is an insidious cancer.
Thank God for the edit function.



bigrich wrote:no worries mate , i like helping people spend their money on custom builds i can't affordfurthermore , on the boyd's site regarding postage i don't see the $100 US limit that used to be imposed on exports , australia is included in countries they'll post to by UPS . i'd check about importing stuff into OZ though, as albo-sleazy changed import laws recently i think . don't know if it applies to rifle stocks , cutting out any middle men could make things cheaper for you . that's why the big import companies don't like cleaver
cleaver still makes a good profit , so how much are we getting skimmed by the supplier and the gunshop before we get our gear ?


Wapiti wrote:This is your fault Rich. Hope you are ashamed of yourself.
Ignore the mounts, they are for another project.

bigrich wrote:lovely scopes aren't theyi use those same scope mounts on all my gear these days, once their tightened up scopes don't move . shot a .5" group off the bench last weekend finalising my 338-06 loads with my vx3HD set on 5 power . didn't need a 6-24 power telescope to do it
the wide field of vision of the lower power scopes is priceless in real world hunting and stalking rifles. especially if you've got a big boar running AT you
![]()

Wapiti wrote:bigrich wrote:lovely scopes aren't theyi use those same scope mounts on all my gear these days, once their tightened up scopes don't move . shot a .5" group off the bench last weekend finalising my 338-06 loads with my vx3HD set on 5 power . didn't need a 6-24 power telescope to do it
the wide field of vision of the lower power scopes is priceless in real world hunting and stalking rifles. especially if you've got a big boar running AT you
![]()
I was apprehensive about buying this second-hand, but there aren't even the slightest signs of ring marks and someone falling for the need for an interstellar telescope for their rifle are my gain.
Oh yeah, those mounts are strong. I only use them where they suit though or there is a built-in pic rail etc.
But on a nice custom set-up or trad hunting rifle, I think they look just too tactical-terry.
I will use the turn-in fronts, windage adjust rears instead, however if I knew I had a straight rifle I'd use the twin turn-ins. They are blued steel, smooth rounded edges, lines that match a streamlined classy rifle, and like the windage adjust ones are the strongest around.
I know this, and will turn off when told they aren't, because I sheared the recoil bars out from under a set of QRW's on my 300RUM sporter and the scope flew off, the sintered metal bars sheared off with an appearance like a piece of steel cut in a guillo. Yes the screws were tight.
Because the rifle is so light, too light really, it takes off rearwards and the heavy scope I used at that time, a VX3 3.5-10x50 30mm tube brain-fart choice just stayed in space and the thing that gave out was the recoil bars.
Edit: this happened when I was first-time sighting the rifle in and running-in the barrel at Belmont range off a bench years ago.
I'm actually glad that the 6-48 screws holding the weaver-style bases to the receiver held and it was the bars that went.
Then I ditched them for the Leupold turn-in bases and rings and no issues with recoil or zero since.
But the clubby, sharp lines of the PRW's are just too angular to suit a custom job elsewhere, me reckons anyway.
. older leupold/redfeild rings and bases were good quality steel , not to sure about current production . the nice blued loopy rings and bases i had on my 338-06 look lovely on that rifle , but i feel better about having steel warne bases with loopy PRW2 rings on it . this has proven to be the most reliable combination in my experience . i've had failings on a few scope mounts over the years , alloy weaver bases i wont use on anything bigger than a 243. i am surprised you sheared of a set of QRW's as they're supposed to be a big game set up . 2 other points , according to leupold website they no longer make the windage classic bases for a lot of rifles , mauser 98 bases no longer available. so if you got some hang onto the . the other thing is leupold don't advise fitting windage mounts to anything with 300 mag recoil . you got a good point about scope weight and the inertia of recoil .